Lab accredited to run tests on 100 Kw on 1500 Kw units
07Aug
Eurovent has recognised Clivet test room as being suitable for conducting Eurovent Approved Certification Tests.
Eurovent has recognised Clivet test room as being suitable for conducting Eurovent Approved Certification Tests.
Between 1st ~ 5th July, technicians from independent DMT laboratory of Essen (D) - appointed by Eurovent, for the first time conducted Certification Tests on two Clivet units in the Clivet laboratory test room 4.
On this occasion, Clivet laboratory test room 4 was recognised as being suitable to run Performance Tests on units from 100 kW ~ 1500 kW for stability of conditions and measurement precision.
This test room is also at disposal of Clivet customers, who can request a Witnessed Test on the units bought in order to verify the declared operation performance.
Mr. Giovanni Ruggeri from Clivet Research & Development Department says: “The Eurovent recognised test room allows Clivet to run certification tests on medium and high capacity units in its laboratories, with the presence of Eurovent technicians. This recognition by Eurovent is also a guarantee for customers about stability of conditions and precision of results - both certification and Witnessed Test, which Clivet has being running for a couple of years in its labs.
The Witnessed Tests also give customers useful suggestions about the best use of the units at the conditions they will work when installed in order to increase comfort, obtain energy saving and reduce CO2 emission thanks to the renewable energy use.”
Witnessed Tests can also be run in the other Clivet lab test rooms: Test room 1 (mono-ambient) for units up to 80 kW, Test rooms 2 and 3 for units up to 30 kW (with the possibility of simulating independent conditions in the use and in the source) and Test room 5 - built at the beginning of 2013 - dedicated to Rooftop up to 300 kW plus air renewal and purification units with active thermodynamic recovery up to 100 kW.
All test rooms of Clivet lab, built between 2008 and 2013, are part of a larger project in which are involved about 50 people working every day to design and develop innovative products and systems completely satisfying every plant and application need in order to grant total comfort with the lowest primary energy consumption and the maximum environment respect in residential, commercial and industrial sectors.
